EMO Hannover 2019, 16 - 21 September
FRESMAK
Designed for achieving a descendant clamping pull down jawsMaterial: Steel with steel spring
ARNOLD SC vices are compact, high and self-centring and maintain constant length. - Accuracy of 0,01 mm in clamping repeatability. - Accuracy 0,02 mm in centring. - ... more
High Pressure ARNOLD MB2 vices are the most flexible vices. They also maintain their constant length irrespective of the size of the workpiece. - Accuracy of 0.01 ... more
High pressure ARNOLD MAT vices maintain their length irrespective of the size of the part, for which they are especially ideal for machining centres (vertical and ... more
High pressure ARNOLD CLASSIC vices achieve a clamping force of up to 80 kN. - Accuracy of 0.01 mm in clamping repeatability. - Monoblock design avoids deformations ... more
High Pressure ARNOLD 5X, are fitted with a clamp as far away as possible form the body and therefore the machine bench. - Accuracy of 0.01 mm in clamping repeatability. - ... more
more
Hydraulic static blocks reach a pressure between 16 KN and 40 KN with an infeed power of 120 bar Stroke range of 6 and 8mm – Double effect actinoning – Repeatability ... more
Jaw: Soft jaw with fixing holes Material: F-1550 (18crMoS4) Can be hardened Assembly: Keyways more
Jaw: Soft jaw Material: F-1550 (18crMoS4) Can be hardened Assembly: Carved 1.5 x 60º more
Mechanical clamping effect by compressed springs. Pneumatic opening. Working pressure 6 bar. No turbo needed. Air blowing for inside cleaning as standard. Repeatability ... more
Hydraulic static blocks reach a pressure between 16 KN and 40 KN with an infeed power of 120 bar Stroke range of 6 and 8mm - Double effect actinoning - Repeatability ... more
High pressure ARNOLD MAT vices maintain their length irrespective of the size of the part, for which they are especially ideal for machining centers (vertical and ... more
High pressure ARNOLD TWIN vices are capable of clamping two pieces simultaneously. - Accuracy of 0.01 mm in clamping repeatability. - Suitable for working in horizontal ... more
The F-GRIP is a clamping system based on reversible adhesion principle. The developed adhesive consists in a biphasic polymer, nano-structured with different adhesion ... more
Designed to achieve a more aggressive clamping Jaws get the most out of the material Material: Hardened steel more
Designed for increasing the clamping field of the vice Designed to tie large and thin pieces Material: Hardened Steel more
Pneumatic static blocks reach a pressure between 8 KN and 20 KN with an infeed power of 6 bar Stroke range of 6 and 8mm – Double effect actioning – Repeatability ... more
Stepped Jaw Universal clamping Material: Hardened steel more
Stepped jaws Universal clamping Material: Hardened steel more
Designed for tiding pieces of difficult geometries Can be machined and hardened Material: 1140F (C45) more
The basis of the intensifying hydraulic spindle is that it works with a closed oil cylinder. On inserting the piston into the chamber, the pressure due to the section ... more
Designed for increasing the clamping field of the vice Designed to tie large and thin pieces Its serrated part increases aggressiveness in clamping Material: Hardened Steel more
Designed to clamp plates avoiding cales or parallel jaws Material: Hardened steel more
Machinable jaws. Can be hardened For special geometry parts Material: F1140 (C45) more
Designed in order to add gripping power A safer clamping Material: Hardened steel more
Designed for clamping uneven work pieced wihout parallel faces. They consist of pins which compensate themselves with through an oil chamber Material: Hardened steel more
Designed for increasing aggressiveness in clamping It consists of interchangeable inserts It has a step to avoid cales or parallels Material: Hardened steel more
Standard Jaw Universal clamping Material: Hardened steel more
Designed for clamping bigger workpieces than the height of the standard jaws. Material: Hardened steel more
Designed for clamping non parallel work pieces They compensate the unevenness of the faces Material: Hardened steel more
Designed for a descendant and safe clamping pull down jaws Universal clamping Material: Hardened steel more
Specially designed for round workpieces Material: Hardened steel more
Pneumatic static blocks reach a pressure between 8 KN and 20 KN with an infeed power of 6 bar Stroke range of 6 and 8mm - Double effect actioning - Repeatability ... more
This unique model is a double effect cylinder with an internal pressure multiplier. To operate it needs to be supplied with oil at 70 bar pressure. With its interior ... more
This spindle has no clutch or a handle therefore bringing the work-piece to the vice is carried out by rotating the pneumo cylinder. This is an ideal spindle for ... more
This model has no clutch. The approach to the work-piece, before exerting the high pressure, is carried out with a handle. It has an automatic forward and backward ... more
The intensifier system on these spindles is based on a series of elements which, as one supports the other, are able to obtain a power intensifying effect by means ... more
Designed for clamping pieces of difficult geometries. Can be machined and hardened. Material: 1140F (C45). more
Stored items
0
The world of metalworking