EMO Hannover 2019,
16 - 21 September
Revolution of an innovationAn innovation should start with the first action – not with the result. That is why SAPHIR QD measurement and analysis software can be intuitively operated and provides perfect measurement results with just a few clicks. Simply switch on the measurement device, load the object even without alignment or even the wrong way round – and detection and measurement can start. The report is displayed as an overlay on the live image together with a graphic report. Multiple measurements – for all those who want everything at onceWhether multiple identical parts or multiple different parts: With the Multiple Measurement identical (MMI) and Multiple Measurement different (MMD), the developers at Schneider Messtechnik have now also integrated the option of multi-part measurement into SAPHIR QD. And the best of all: The software thinks with you. For this reason, the measurement elements can vary without additional intervention, the software scans all the parts in the measurement range. If a part is loaded for which a programme does not yet exist, the software nevertheless goes to work: Detect contour, create CAD drawing, carry out alignment – measure. In short: SAPHIR QD identifies all the elements to be measured and integrates these into the measuring programme at a click. Measurement technology can be that fast! Special features of SAPHIR QD• Parts can even be loaded the wrong way round. The part is nevertheless recognised and the measurement performed. • In addition to single-part measurement, the measurement of multiple identical parts at the same time is possible here (MMi=Multiple Measurement identical), as well as the simultaneous measurement of multiple non-identical parts (MMd=Multiple Measurement different).• The software scans all the parts in the measurement range.No quantities have to be entered into the controller in advance. • The contour is immediately detected, even if a part is loaded for which there is no existing program. The software aligns the workpiece automatically and saves the image from the measurement camera for part recognition.• The measuring programme is automatically created as soon as the dimension arrows are moved to the relevant points of the DXF file. • Alternatively, the software identifies all the elements to be measured independently with autodimensioning and integrates these automatically into the measuring programme.
Innovative development from Schneider
Visual Tool Preset from Dr. Heinrich Schneider Messtechnik sets a new standard in tool presetting and was designed specially ...
U-SOFT SOLID ultra. Accurate measurement. Easier. Faster.
Quick single part measurement: 40-60% less input work, half the measurement time
User software in the ...
SAPHIR measurement and analysis software Option "Shaft" (shaft measurement)
"Shaft" is an optional add-on for the SAPHIR measurement and analysis software
The control centre for your quality assurance -Interface between man and machine
This concept had the highest priority during the development of the SAPHIR 3D ...
Precise manual measurement of geometric elements using the intuitive multi-touch application
• Clearly structured user interface
• No hidden submenus
• Innovative ...
Intuitive multi-touch application for profile or measurement projectors
With the M2 measurement software, Dr. Heinrich Schneider Messtechnik is setting new standards ...
High Tech/Low Budget
Tailor-maide solutions for your measurement tasks for the measuring of stamped, plastic, rubber, milled parts, tools, profiles, boards etc.
Digital Projector DP
for Fast and Easy Measurement and Comparison of 2D Workpiece Contours
The administration of templates and overlays takes time and money. The ...
Vertical profile projectors PV 300 / PV 360
The perfect choice for reliable measurement of plastic parts, seals and gaskets, dies, profi les and other objects.
Vertical measurement projectors ST 600 V / ST 750 V / ST 1000 V
Schneider measuring projectors with vertical optical path are equipped with a highly rigid mechanical ...
Horizontal measurement projectors ST 600 H / ST 750 H / ST 1000 H
Schneider measurement projectors with horizontal optical path are equipped with a highly rigid ...
Vertical measurement projector MV 600 in fl oor-standing design
For reliable measurement of stamped parts, profi les, dies, tools and other objects
Standard features ...
Horizontal measurement projector MH 360
The perfect choice for reliable measurement of tools, turned parts, shafts, pipes/tubes and other objects.
Especially when ...
High-end device for sophisticated measurement tasks
With the creation of series PMS LL, the development team from Bad Kreuznach has set yet another milestone in ...
All models of the PMS series feature a highly flexible design − ideal for measuring workpieces of up to 2000 mm in size
This sturdy portal-type measuring machine ...
Bridge-type 3D coordinate measurement machine
The new TMM series is designed to be in the midst of the action – directly involved in the production environment. ...
Precise high-tech measurement machine for the measurement of large-scaled:
• stamped parts
• milled parts
• plastic parts
• rubber parts
The WM1 G series ...
High Tech/Low Budget
Tailor-maide solutions for your measurement tasks for the measuring of stamped, plastic, rubber, milled parts, tools, profiles, boards...
The optical presetting device STP 500 has been developpend for measuring and presetting tools directly on the machine or in the manufacturing cell.
The V-CAD 80 machines from Dr. Heinrich Schneider Messtechnik have been developed to deliver fast and precise 2D measurements. In particular, for profiles made of ...
With the 2D optical devices V-CAD 60 and V-CAD 300 the workpiece will be simply positioned anywhere in the image field, touch the screen of the multi-touch panel ...
All in one - the WMM series reduce your throughput times!
With the standard machines from the WMM series, you have the ability to measure rotationally symmetrical ...
With the standard machines from the WMM series, you have the ability to measure rotationally symmetrical parts up to 450 mm in length and a maximum diameter of 150 ...
WMM 100 and 200 - Measurements made easy!
Thanks to a large field of view (100 x 60 mm) and a 16 megapixel CCD camera, an accurate and repeatable result can be ...
Turned parts measured in seconds!
The WMM 65 modular optical measurement system can be confi gured to meet the demanding requirements of your quality assurance ...
Intelligent shaft measurement for future digitalised factories
The measurement of static and dynamic features in a matter of seconds guarantees accurate and reproductible ...
For reliable measurement of plastic parts, seals/gaskets, dies, profi les and other objects
State-of-the-art measurement projectors developed by Dr. Heinrich Schneider ...