EMO Hannover 2019,
16 - 21 September
15Ton Twin Sliding Head Machine with automatic loading (non-rotating part) and unloading the welded jobThis 15 ton dual sliding head machine is designed for welding end pieces on tubes/pipes to make propeller shafts. End pieces are welded simultaneously with precise orientation, which reduces welding time drastically. The machine consists of a steel fabricated frame on which the LH and RH spindle heads moves on LM guides, by servo hydraulic cylinders. The piston rod of servo hydraulic cylinder which is rigidly mounted on the frame at the left is connected to the left spindle head slide. Another servo hydraulic cylinder at the right is mounted on a slide unit, which can be moved by a pneumatic cylinder. This arrangement helps in accommodating component length variants. The self-centering vices, one fixed and another adjustable are mounted in between LH and RH spindle heads.The machine is equipped with mechanisms for auto loading of non-rotating component (tubes) and unloading of welded components. The machine has a PLC based control system with an industrial PC and software capturing real time weld data.Application: Enables welding at both ends of propeller shafts simultaneously to join end pieces to tube with precise orientation.
Friction stir welding is an Eco-friendly process to weld and produce near nano grain size materials. It is a relatively new solid-state joining process and is useful ...
This facilitates easy configuration of the test set ups to conduct the following tests on Steering Gear of Passenger Cars and Utility Vehicles.
High Speed Production Cell for Engine Valve Forgings
The cell is designed for continuous production of engine valve head forgings. This consists of a Servo controlled ...
Automatic Loading and Unloading System. Low Cycle time of 5 seconds. Stem Straightened within 0.05mm and head within 0.08 mm. Heating System for Titanium Valves ...
Automatic Loading and Unloading. Cycle time achieved is less than 10 secs. Two axis CNC slide for Grooving and Chamfering. Tappet face also machined in same setting. ...
Automatic loading and ejection of components. Job head is actuated through Pneumatic-hydraulic cylinder, Capable of removing material up to 2mm per stroke.
Ball Turning and Burnishing Machine (BTBM) is used for turning and burnishing of ball head used in automobile ball joints (steering gears, for e.g). There is an ...