EMO Hannover 2019,
16 - 21 September
The patented workholding systems of the series HILMA MC-P are highly versatile due to numerous variants and an extensive range of accessories. They excel by high stability and precision with very good accessibility and comprehensive swarf protection. There are versions for concentric clamping, clamping against a fixed jaw or position flexible clamping as well as mechanically or hydraulically operated variants. Types with a jaw width between 40 mm and 125 mm, maximum clamping forces from 8 kN to 35 kN and a large selection of jaw openings up to 6-400 mm are on offer.Thanks to the compact design, collision-free tool paths and the use of short standard tools in 5-axis machining are possible. A further advantage for the user is the option to clamp workpieces for clamping cycle 1 and 2 in one system. Raw and finished parts can be machined without retrofitting. Due to the good swarf protection, the workholding systems are particularly suitable for the use in pallet systems.Besides 5-axis machining and concentric clamping, the position flexible version MC-P Z Balance is suitable for individual or series clamping of bars, rails, profiles, guide rails or housings. The compensating function avoids deformation during clamping of delicate or long components so that a precise and process-safe manufacturing is guaranteed. Also workpieces that are fixed by internal contours or positioning elements can be clamped concentrically. A comprehensive range of jaws with interchangeable step, pendulum and prismatic jaws, as well as interchangeable inserts with hard-metal coating or grip serrated complete the product group. On request, MC-P workholding systems can also be delivered as customised versions.
Inexpensive and compact clamping element with high clamping force for simple clamping tasks. The insertion of workpieces from
possible unhindered at the top, since ...
Pneumatic swing clamps with locking mechanism maintain clamping force
- in the event of a pressure drop in the pneumatic line;
- if the supply line of a pneumatic ...
The basis for simple zero point clamping
- Positioning and clamping in one function
- compact design with high clamping forces
- Modular design with 14 variants
Protect Difficult-to-Access Surfaces against Deflection
To stabilize the components that could swing or bend during machining, the ROEMHELD Group has developed ...
For the operation of hydraulic clamping fixtures and other handling and clamping systems on machine tools.
The power units of this series consist of ...
Position flexible clamping elements can be used for supporting and clamping of unstable workpiece sections. They adapt themselves to the position of the clamping ...
The hydraulically-operated bore clamp is particularly suitable for clamping in workpieces with smooth bore holes in the support surface ranging from 8 to 12 mm in ...
Electric swing clamps are used for clamping or holding of workpieces
- where the use of hydraulic clamping elements is not possible
- where the clamping force must ...
TS tower workholding systems are used on horizontal machining centres, in vertical machining in connection with 4th axis, but also on 5-axis machining centres. The ...
The SPEEDY connect series are fast closing clamps made of high-quality tool steel and a housing made of anodised, high-strength aluminium with very low space requirements ...
The workholding systems SCS are especially advantageous for 5-axis machining.
The compact design allows a good accessibility of the tools to the workpiece. Collision-free ...