EMO Hannover 2019, 16 - 21 September

    EMO Hannover 2019, 16 - 21 September
    Homepage>Exhibitors & Products >Counterbore - Countersinking revolutionised

    Counterbore - Countersinking revolutionised

    Logo Counterbore - Countersinking revolutionised

    Product description

    Countersinks are standard products. They are produced in large quantities and are used in practically every machining process, because as the saying goes: No bore without a countersink. The design of countersinks, however, has barely changed over the past decades, if at all. Equipped with three blades, the tools have an equal pitch between the cutting edges. Large axial forces cause vibrations of the tool and result in a poor surface finish. Furthermore, the tools do not achieve long tool lives.

    But why shouldn‘t a secondary machining process also be optimised? MAPAL developed a completely new generation of countersinks with significantly reduced axial forces. The cutting edges of the new countersinks have an unequal pitch. With this pitch, the axial force is reduced by more than 50 % compared with conventional countersinks.

    The forces acting perpendicularly to the tool axis are also reduced. Such optimised operating conditions create far less vibrations at the tool, allowing higher accuracies and better surface finishes to be achieved. The precision of the countersink leads to an immediately improved contact of bolted and riveted joints, eliminating settling of the joint under load after assembly.

    The reduced load on the machine also extends the tool life of the tools. Thanks to the smooth and stable running, the tools can also be operated with higher cutting data, resulting in considerable savings in time. The new countersinks (patent pending) raise countersinking operations to a new technological level.

    Product website

    Hall 4, Stand A18

    More products from MAPAL

    Show more

    Stored items


    Server communication error: Item could not be saved.