EMO Hannover 2019, 16 - 21 September

    EMO Hannover 2019, 16 - 21 September
    Homepage>Exhibitors & Products >Chucking system - HSK-Super Look

    Chucking system - HSK-Super Look

    Exhibition stand

    Hall 3, Stand B72
    Open Exhibition Grounds map

    Product description

    The trend toward modern milling machines involves two requirements with regard to the automatic clamping systems. In the area of High Speed Cutting (HSC), increasingly higher speeds and therefore higher balancing qualities are required. Due to higher machining forces during High Performance Cutting (HPC), interfaces must additionally be more rigid. SUPER-LOCK meets these requirements, and with an approx. 50 % shorter length as compared with conventional clamping systems with springs.

    Advantages at a glance
    Compact and extremely short design
    Optimally suited for maximum speeds and machining forces
    Lower force introduced into the spindle as compared to spring clamping systems

    Product website

    Product categories

    All products offered by this exhibitor

    - NC-Compact self centering vice RZM

    The new RZM from Röhm is designed to meet these requirements. Without any additional substructures or special jaws, the centric clamping unit holds the workpiece securely - with a minimum interference contour as is standard with 5-axis clamping. The special features of the RZM are the relatively high ...read more

    Chucking system - Pull-in force measurement device F-senso

    Ensuring consistently high machining quality has top priority. Due to the regular check of the tool clamping system with the pull-in force measuring device, F-senso spindle, changes in the clamping force are detected even before it has an effect on the machining quality. Advantages at a glance: Maximum ...read more

    Chucking system - HSK-Super Look

    The trend toward modern milling machines involves two requirements with regard to the automatic clamping systems. In the area of High Speed Cutting (HSC), increasingly higher speeds and therefore higher balancing qualities are required. Due to higher machining forces during High Performance Cutting (HPC), ...read more

    Chucking system - Clamping force measurement device F-senso chuck

    With F-senso chuck, check both the clamping force as well as the speed behavior of the clamping device Maximum flexibility through large clamping range from 75-175 mm by means of exchangeable pressure bolts and large measuring range from 0-100 kN per jaw. Suitable for 3-jaw chuck as well as vices. Dynamic ...read more

    Lathe chuck, hydraulically operated - Power chucks with quick-acting j

    The quick-acting jaw change system allows flexible use of the power chuck and drastically reduces of set-up times. The jaws can be flexibly offset, turned or changed. Thanks to the individual jaw unlocking on the DURO-NCSE power chuck, handling with large, workpiece-specific customized top jaws is especially ...read more

    Machine vice - Machine vices

    Universally usable and proven many times over The RÖHM machine vice is suitable for universal application on milling machines and machining centers. The base is equipped with grooves to ensure a precise fastening on the machine table. RÖHM machine vices are ideally suited for universal use on milling ...read more

    Lathe chuck, hand operated - Geared scroll chucks

    Proven chuck with spiral ring The RÖHM geared scroll chucks have already been in use for decades and have proven themselves a thousand times over. The jaws can be quickly adjusted over the entire clamping range by means of the spiral ring. Using the radially arranged drive, the force is transferred to ...read more

    Drill chuck - Key-type drill chucks

    Universally Applicable Key-type drill chucks are the all-round talents among drill chucks. In stationary box column drills, hand-operated corded and cordless drills, the drill chucks perform in every way. Key-type drill chucks from RÖHM convince with their universal applicability. These drill chucks ...read more

    Centre, tailstock for lathes - Live centres

    Perfect partner for production: The live centres from Röhm The clamping technology specialist Röhm presents its live centres, which simplify everyday life in production with the multitude of product benefits. They help as a perfect partner when dealing with counter-clamping of workpieces on turning ...read more

    Expanding mandrel - MZE mandrels

    For small clamping diameters and low construction heights: The MZE mandrels from Röhm The clamping and gripping specialist Röhm provides solutions for the greatest variety of machining tasks. When it is necessary to perform light turning, grinding and measuring work, the MZE cartridge mandrels are the ...read more

    Lathe chuck, hydraulically operated - Power chucks with through-hole -

    Making something good, even better – that is the maxim of Röhm engineers and technicians. So it is no wonder that the clamping technology specialists have set about combining the best properties of 3 and 2 jaw chucks thereby providing even more flexibility in machining. Hence, the so-called 3/2 jaw ...read more

    Chucking system - Assembly tool for HSK clamping sets

    Easy, quick and reliable: How HSK clamping sets are changed today Easy handling, fast operation and reliable function – those are properties that workers would like for their daily work. The clamping and gripping specialist Röhm tackles these requirements and shows its assembly tool for mounting HSK ...read more

    Expanding mandrel - Segment clamping mandrel ABSIS

    ABSIS Segment clamping mandrel, power-operated with flanged seat; for internal clamping consists of basic mandrel, adapter, ejector ring, locking belt compact, solid design for precise machining steady clamping by axial draw-in The draw-in of the work-pieces against the rigid work-stop takes place independently ...read more

    - NC-Compact vices

    NC-Compact vice Type 743-10 RKE With stepped jaws The NC-compact vice RKE: optimized design with proven quality Especially used on CNC-machines. Horizontal, side or in connection with a basic plate vertical mounting, for example as DUO clamping tower (back to back). Size 92 - clamping system mechanical-hydraulical ...read more

    - Constant face drivers

    For rational turning of workpieces on their entire length without reclamping with high precision. Developed according to the modular system, therefore universal exchange of driving discs and centres possible. One set consists of one basic body, one driving disc and suitable centre. Easy to maintain read more

    - Key bar chucks with quick-acting jaw change system

    DURO-T key bar chucks are successfully used wherever extremely high tension forces, high concentric accuracy and reliable continuous repeatability are needed. For lathes. Suitable for milling machines, dividing attachments and machining centres in connection with a base plate, non rotating. The jaws ...read more

    - Quick-action drill chucks

    Keyless drill chucks for cordless screw-drivers, cordless and corded drills with hexagon for assembling and disassembling on the machine spindle. This drill chuck series is specially designed for use with cordless screwdrivers, cordless and corded drills. The ideal chuck for professionals and D.I.Y. ...read more

    Stored items


    Server communication error: Item could not be saved.