For applications where repeatability is required, often our clamp lever chuck is the solution
The well-guided drive element precisely powers both levers equally and the necessary repeatability is ensured. To ensure that this accuracy is also applied on the workpiece over longer periods of time, stable guides and the selection of the suitable material are extremely important.
Change-over with in 2 minutes
The clamp lever chuck is equipped on the base surface with a CENTREX interface, which enables the clamping device to be changed within 2 minutes. Surprising: regardless of the manufacturing facility, the country, the machine on which it is installed – the clamping repeatability measured on the workpiece is < 5 μm.
• Position accuracy without alignment of the entire set-up [clamping device, jaws, and clamping device table interface] measured on the master bolt < 0.005 mm
• The entire set-up can be changed within 2 min.